Warn ProVantage 2500-s User Manual download pdf (Page 3)

WARN INDUSTRIES

5 89294A0

GENERAL SAFETY PRECAUTIONS

AVOID WINCH AND EQUIPMENT

DAMAGE

• Always avoid side pulls which can pile up winch

rope at one end of the drum. This can damage

winch rope or winch.

• Always ensure the clutch is fully engaged or

disengaged.

• Always use care to not damage the vehicle frame

when anchoring to a vehicle during a winching

operation.

• Never submerge winch in water.

• Always store the remote control in a protected,

clean, dry area.

NOTICE

MOVING PARTS ENTANGLEMENT

HAZARD

Failure to observe these instructions could

lead to minor or moderate injury.

To avoid injury to hands or ﬁ ngers:

• Never leave remote control where it can be

activated during free spooling, rigging, or when the

winch is not being used.

• Never leave the winch remote control plugged in

when installing, freespooling, rigging, servicing or

when the winch is not being used.

CHEMICAL AND FIRE HAZARD

Failure to observe these instructions could

lead to serious injury or death.

• Always remove jewelry and wear eye protection.

• Never route electrical cables across sharp edges.

• Never route electrical cables near parts that get

hot.

• Never route electrical cables through or near

moving parts.

• Always place the supplied terminal boots on

wires and terminals as directed by the installation

instructions.

• Never lean over battery while making

connections.

• Never route electrical cables over battery

terminals.

• Never short battery terminals with metal objects.

• Always verify area is clear of fuel lines, fuel tank,

brake lines, electrical wires, etc., when drilling.

• Always consult operator’s manual for proper

wiring details.

• Always insulate and protect all exposed wiring

and electrical terminals.

CUT AND BURN HAZARD

Failure to observe these instructions could

lead to minor or moderate injury.

• Never let winch rope slip through your hands.

CAUTION

WARNING CAUTION

WARN INDUSTRIES

89294A0 6

SAFE WORKING CONDITIONS

Safety

When installing your ATV/UTV winch

system, read and follow all mounting and

safety instructions.

Always use caution when working with

electricity and remember to verify that no

exposed electrical connections exist before

energizing your winch circuit.

For specifications and performance data,

refer to the specification sheet supplied with

your winch.

Figure 1: To install the complete kit, you will need to mount the winch, contactor

handlebar mounted Mini-rocker switch and remote socket (optional on some models). Mounting locations may vary depending

on make and model of the ATV/UTV. Read and understand the following instructions to choose the appropriate mounting

locations.

1 2 3 4 5 6 7 8 ... 35 36

Comments to this Manuals

No comments

Warn ProVantage 2500-s User Manual Page 3

Comments to this Manuals

Related products and manuals for For the car Warn ProVantage 2500-s