Warn 4700 DC User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 127
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
PAGE 9 85362 Rev. A0
Winch Installation to a fixed location- continued
To secure the winch, always use:
A flat, secure mounting location at least 3/16 in. (4.8 mm) thick steel.
3/8 in. lockwasher x 4.
3/8-16 x 1in. long, hex head capscrew, Grade 5 or better x 4.
Torque mounting bolts to 30-35 ft-lbs (41-47 Nm).
Bolt length may need to be longer that specified above depending upon the thickness of the material the
winch is mounted to.
Wiring Instructions
WARNING
Shock & Fire Hazard
Failure to observe these instructions could lead to severe injury or death.
WARNING
!
Do not route electrical cables
across sharp edges.
To Prevent Serious Injury or
Read and follow all wiring
Death from Electrical Fire:
Do not route electrical cables
through or near moving parts.
instructions included in
operators manual.
Insulate and protect all exposed
wiring and electrical terminals.
Never route electrical cables across sharp edges
Never route electrical cables through or near moving parts.
Always read and follow all wiring instructions included in operators guide.
Always insulate and protect all exposed wiring and electrical terminals
Install battery cables with red lead connected to the positive terminal of battery, and black lead to
the negative terminal of battery.
Verify that all wiring connections are clean and tight.
Before using the winch, verify the following:
Wiring to all components is correct.
There are no exposed wiring or terminals, cover any existing exposures with insulator plate,
terminal boots, heat shrink tubing or electrician’s tape.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 126 127

Comments to this Manuals

No comments